CE-200 - HPE Environmental Services

HPE Environmental Solutions
Go to content


Automatic Wastewater Treatment System

 Ringwood Environment, Inc. systems are designed to work best with one-step clay-based separating agents. Although our equipment can be used with traditional treatment chemicals, highest efficiency and ease of operation is achieved with a bentonite clay-based treatment program.

Clay-based flocculants can be mixed very quickly with the wastewater, producing large floc particles that won't break down under heavy agitation. Once mixing is complete, these large flocs quickly settle, allowing the clear water layer to be drawn off. Furthermore, the resulting sludge dewaters easier than the sludge produced from liquid treatment chemicals.

The resut is a faster, smoother-running treatment process requiring minimal operator time. 

Features & Benefits
Full Automation GA Series with manual overrides
Maximum throughput: 600 GPH
200-gallon treatment tank
Allen-Bradley Micrologix PLC controls
UL approved control panel
1 horsepower heavy duty agitator with jet basket
Treatment tank auto washdown
Pre-plumbed for effluent pump
Automatic chemical feed system with 300 lb. hopper, complete with 2000 lb. superbag support frame
Double rollers for greater dewatering
Equipment Measurements: Length: 10'4", Width: 5'6", Height: 11'4", Weight: approximately 3500 lbs. 

Ph 604.940.1599     Fax 604.940.1595     Toll free 1.800.626.6465
HPE Environmental Solutions 125-12051 Horseshoe Way, Richmond, B.C. V7A 4V4
Back to content